This ph meter requires battery.
The ATC runs from 0.00 – 14.00
When the PH meter came and I opened it, I noticed right away
that it was a used one. There are scratches and air bubbles on the screen. The
reading was not very stable when I first tried it. I read the instruction and
calibrated the meter. The reading can take 5-10 seconds to become stable. The
tap water is around PH level of 5-6 from PH strip reading. I tested with the
meter and it reads 6.41 which is relatively close to what I should get. Keep in
mind we really shouldn’t be consuming acidic water OR tap water.
FYI: Cancer cells thrive in acidic environment.
This ph meter requires battery.
The ATC runs from 0.00 – 14.00
The meter is easy to use and operate. There are two buttons;
on/off and calibration. To measure the ph level of water you simply dip the tip
of the meter in the water and wait until the measurement is stable. Sometimes
when the electrode dies out from due to prolonged exposure to air, which can
lead to slow or unstable reading. The electrode should be immerse into
distilled water for 2-3 hours to fix this problem.
After finish using the meter, the cap should be placed back
to reduce the electrode from exposure to air.
PH meter measures acidity and alkaline level in liquid. PH level of tap
water is 6.4 which is considered acidic.
No comments:
Post a Comment